trying to compile a wallet and i am getting this error?

trying to compile a wallet and i am getting this error?

So i am trying to compile this wallet on a raspberry Pi i could compile the daemon fine but not the qt here is the could please help thank you.

 pi@raspberrypi:~ $ free
          total        used        free      shared  buff/cache   
 available
  Mem:         945024      201776      322996       27932      420252      
  664672
  Swap:       2199544           0     2199544
  pi@raspberrypi:~ $ cd magnet
  pi@raspberrypi:~/magnet $ qmake -qt=qt5 USE_UPNP=- && \
  > make
   Project MESSAGE: Building with DBUS (Freedesktop notifications) 
  support
  Project MESSAGE: Building with IPv6 support
   Project MESSAGE: Building without UPNP support
  Removed plural forms as the target language has less forms.
 If this sounds wrong, possibly the target language is not set or 
  recognized.
   Removed plural forms as the target language has less forms.
    If this sounds wrong, possibly the target language is not set or 
   recognized.
    Removed plural forms as the target language has less forms.
    If this sounds wrong, possibly the target language is not set or 
    recognized.
    cd /home/pi/magnet/src/leveldb && CC=gcc CXX=g++ make OPT="-pipe -
    fstack-protector-all --param ssp-buffer-size=1 -D_FORTIFY_SOURCE=2 -
    O2" libleveldb.a libmemenv.a
    make[1]: Entering directory '/home/pi/magnet/src/leveldb'
    make[1]: 'libleveldb.a' is up to date.
    make[1]: 'libmemenv.a' is up to date.
    make[1]: Leaving directory '/home/pi/magnet/src/leveldb'
cd /home/pi/magnet/src/secp256k1 && ./autogen.sh && ./configure --enable-module-recovery && CC=gcc CXX=g++ make OPT="-pipe -fstack-protector-all --param ssp-buffer-size=1 -D_FORTIFY_SOURCE=2 -O2"
libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, 'build-aux'.
libtoolize: copying file 'build-aux/ltmain.sh'
libtoolize: putting macros in AC_CONFIG_MACRO_DIRS, 'build-aux/m4'.
libtoolize: copying file 'build-aux/m4/libtool.m4'
libtoolize: copying file 'build-aux/m4/ltoptions.m4'
libtoolize: copying file 'build-aux/m4/ltsugar.m4'
libtoolize: copying file 'build-aux/m4/ltversion.m4'
libtoolize: copying file 'build-aux/m4/lt~obsolete.m4'
configure.ac:10: installing 'build-aux/compile'
configure.ac:9: installing 'build-aux/missing'
Makefile.am: installing 'build-aux/depcomp'
checking build system type... armv7l-unknown-linux-gnueabihf
checking host system type... armv7l-unknown-linux-gnueabihf
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking how to print strings... printf
checking for style of include used by make... GNU
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables... 
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking whether gcc understands -c and -o together... yes
checking dependency style of gcc... gcc3
checking for a sed that does not truncate output... /bin/sed
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for fgrep... /bin/grep -F
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking how to convert armv7l-unknown-linux-gnueabihf file names to armv7l-unknown-linux-gnueabihf format... func_convert_file_noop
checking how to convert armv7l-unknown-linux-gnueabihf file names to toolchain format... func_convert_file_noop
checking for /usr/bin/ld option to reload object files... -r
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for dlltool... no
checking how to associate runtime and link libraries... printf %s\n
checking for ar... ar
checking for archiver @FILE support... @
checking for strip... strip
checking for ranlib... ranlib
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking for sysroot... no
checking for a working dd... /bin/dd
checking how to truncate binary pipes... /bin/dd bs=4096 count=1
checking for mt... mt
checking if mt is a manifest tool... no
checking how to run the C preprocessor... gcc -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC -DPIC
checking if gcc PIC flag -fPIC -DPIC works... yes
checking if gcc static flag -static works... yes
checking if gcc supports -c -o file.o... yes
checking if gcc supports -c -o file.o... (cached) yes
checking whether the gcc linker (/usr/bin/ld) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking whether make supports nested variables... (cached) yes
checking for pkg-config... /usr/bin/pkg-config
checking pkg-config is at least version 0.9.0... yes
checking for ar... /usr/bin/ar
checking for ranlib... /usr/bin/ranlib
checking for strip... /usr/bin/strip
checking for gcc... gcc
checking whether we are using the GNU C compiler... (cached) yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... (cached) none needed
checking whether gcc understands -c and -o together... (cached) yes
checking dependency style of gcc... (cached) gcc3
checking how to run the C preprocessor... gcc -E
checking for gcc option to accept ISO C89... (cached) none needed
checking if gcc supports -std=c89 -pedantic -Wall -Wextra -Wcast-align -Wnested-externs -Wshadow -Wstrict-prototypes -Wno-unused-function -Wno-long-long -Wno-overlength-strings... yes
checking if gcc supports -fvisibility=hidden... yes
checking for __int128... no
checking for __builtin_expect... yes
checking for x86_64 assembly availability... no
checking gmp.h usability... yes
checking gmp.h presence... yes
checking for gmp.h... yes
checking for __gmpz_init in -lgmp... yes
checking for CRYPTO... yes
checking for main in -lcrypto... yes
checking for EC functions in libcrypto... yes
checking whether byte ordering is bigendian... no
configure: Using assembly optimizations: no
configure: Using field implementation: 32bit
configure: Using bignum implementation: gmp
configure: Using scalar implementation: 32bit
configure: Using endomorphism optimizations: no
configure: Building ECDSA pubkey recovery module: yes
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile
config.status: creating libsecp256k1.pc
config.status: creating src/libsecp256k1-config.h
config.status: src/libsecp256k1-config.h is unchanged
config.status: executing depfiles commands
config.status: executing libtool commands
make[1]: Entering directory '/home/pi/magnet/src/secp256k1'
make[1]: Leaving directory '/home/pi/magnet/src/secp256k1'
cd /home/pi/magnet; /bin/sh share/genbuild.sh /home/pi/magnet/build/build.h
/usr/lib/arm-linux-gnueabihf/qt5/bin/moc -DENABLE_WALLET -DBOOST_THREAD_USE_LIB -DBOOST_SPIRIT_THREADSAFE -DQT_DISABLE_DEPRECATED_BEFORE=0 -DBOOST_VARIANT_USE_RELAXED_GET_BY_DEFAULT -DUSE_DBUS -DUSE_IPV6=1 -DHAVE_BUILD_INFO -DLINUX -DQT_NO_DEBUG -DQT_PRINTSUPPORT_LIB -DQT_WIDGETS_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_DBUS_LIB -DQT_CORE_LIB -I/usr/lib/arm-linux-gnueabihf/qt5/mkspecs/linux-g++ -I/home/pi/magnet -I/home/pi/magnet/src -I/home/pi/magnet/src/json -I/home/pi/magnet/src/qt -I/home/pi/magnet/src/qt/plugins/mrichtexteditor -I/home/pi/magnet/src/leveldb/include -I/home/pi/magnet/src/leveldb/helpers -I/home/pi/magnet/src/secp256k1/include -I/usr/include/arm-linux-gnueabihf/qt5 -I/usr/include/arm-linux-gnueabihf/qt5/QtPrintSupport -I/usr/include/arm-linux-gnueabihf/qt5/QtWidgets -I/usr/include/arm-linux-gnueabihf/qt5/QtGui -I/usr/include/arm-linux-gnueabihf/qt5/QtNetwork -I/usr/include/arm-linux-gnueabihf/qt5/QtDBus -I/usr/include/arm-linux-gnueabihf/qt5/QtCore -I/usr/include/c++/6 -I/usr/include/x86_64-linux-gnu/c++/6 -I/usr/include/c++/6/backward -I/usr/lib/gcc/x86_64-linux-gnu/6/include -I/usr/local/include -I/usr/lib/gcc/x86_64-linux-gnu/6/include-fixed -I/usr/include/x86_64-linux-gnu -I/usr/include src/qt/overviewpage.cpp -o build/overviewpage.moc
usr/include/c++/6/bits/memoryfwd.:50: Parse error at "std"
Makefile:2050: recipe for target 'build/overviewpage.moc' failed
make: *** [build/overviewpage.moc] Error 1
pi@raspberrypi:~/magnet $ qmake -qt=qt5 USE_UPNP=- && make
Project MESSAGE: Building with DBUS (Freedesktop notifications) support
Project MESSAGE: Building with IPv6 support
Project MESSAGE: Building without UPNP support
Removed plural forms as the target language has less forms.
If this sounds wrong, possibly the target language is not set or recognized.
Removed plural forms as the target language has less forms.
If this sounds wrong, possibly the target language is not set or recognized.
Removed plural forms as the target language has less forms.
If this sounds wrong, possibly the target language is not set or recognized.
cd /home/pi/magnet/src/leveldb && CC=gcc CXX=g++ make OPT="-pipe -fstack-protector-all --param ssp-buffer-size=1 -D_FORTIFY_SOURCE=2 -O2" libleveldb.a libmemenv.a
make[1]: Entering directory '/home/pi/magnet/src/leveldb'
make[1]: 'libleveldb.a' is up to date.
make[1]: 'libmemenv.a' is up to date.
make[1]: Leaving directory '/home/pi/magnet/src/leveldb'
cd /home/pi/magnet/src/secp256k1 && ./autogen.sh && ./configure --enable-module-recovery && CC=gcc CXX=g++ make OPT="-pipe -fstack-protector-all --param ssp-buffer-size=1 -D_FORTIFY_SOURCE=2 -O2"
libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, 'build-aux'.
libtoolize: copying file 'build-aux/ltmain.sh'
libtoolize: putting macros in AC_CONFIG_MACRO_DIRS, 'build-aux/m4'.
libtoolize: copying file 'build-aux/m4/libtool.m4'
libtoolize: copying file 'build-aux/m4/ltoptions.m4'
libtoolize: copying file 'build-aux/m4/ltsugar.m4'
libtoolize: copying file 'build-aux/m4/ltversion.m4'
libtoolize: copying file 'build-aux/m4/lt~obsolete.m4'
configure.ac:10: installing 'build-aux/compile'
configure.ac:9: installing 'build-aux/missing'
Makefile.am: installing 'build-aux/depcomp'
checking build system type... armv7l-unknown-linux-gnueabihf
checking host system type... armv7l-unknown-linux-gnueabihf
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking how to print strings... printf
checking for style of include used by make... GNU
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables... 
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking whether gcc understands -c and -o together... yes
checking dependency style of gcc... gcc3
checking for a sed that does not truncate output... /bin/sed
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for fgrep... /bin/grep -F
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking how to convert armv7l-unknown-linux-gnueabihf file names to armv7l-unknown-linux-gnueabihf format... func_convert_file_noop
checking how to convert armv7l-unknown-linux-gnueabihf file names to toolchain format... func_convert_file_noop
checking for /usr/bin/ld option to reload object files... -r
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for dlltool... no
checking how to associate runtime and link libraries... printf %s\n
checking for ar... ar
checking for archiver @FILE support... @
checking for strip... strip
checking for ranlib... ranlib
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking for sysroot... no
checking for a working dd... /bin/dd
checking how to truncate binary pipes... /bin/dd bs=4096 count=1
checking for mt... mt
checking if mt is a manifest tool... no
checking how to run the C preprocessor... gcc -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC -DPIC
checking if gcc PIC flag -fPIC -DPIC works... yes
checking if gcc static flag -static works... yes
checking if gcc supports -c -o file.o... yes
checking if gcc supports -c -o file.o... (cached) yes
checking whether the gcc linker (/usr/bin/ld) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking whether make supports nested variables... (cached) yes
checking for pkg-config... /usr/bin/pkg-config
checking pkg-config is at least version 0.9.0... yes
checking for ar... /usr/bin/ar
checking for ranlib... /usr/bin/ranlib
checking for strip... /usr/bin/strip
checking for gcc... gcc
checking whether we are using the GNU C compiler... (cached) yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... (cached) none needed
checking whether gcc understands -c and -o together... (cached) yes
checking dependency style of gcc... (cached) gcc3
checking how to run the C preprocessor... gcc -E
checking for gcc option to accept ISO C89... (cached) none needed
checking if gcc supports -std=c89 -pedantic -Wall -Wextra -Wcast-align -Wnested-externs -Wshadow -Wstrict-prototypes -Wno-unused-function -Wno-long-long -Wno-overlength-strings... yes
checking if gcc supports -fvisibility=hidden... yes
checking for __int128... no
checking for __builtin_expect... yes
checking for x86_64 assembly availability... no
checking gmp.h usability... yes
checking gmp.h presence... yes
checking for gmp.h... yes
checking for __gmpz_init in -lgmp... yes
checking for CRYPTO... yes
checking for main in -lcrypto... yes
checking for EC functions in libcrypto... yes
checking whether byte ordering is bigendian... no
configure: Using assembly optimizations: no
configure: Using field implementation: 32bit
configure: Using bignum implementation: gmp
configure: Using scalar implementation: 32bit
configure: Using endomorphism optimizations: no
configure: Building ECDSA pubkey recovery module: yes
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile
config.status: creating libsecp256k1.pc
config.status: creating src/libsecp256k1-config.h
config.status: src/libsecp256k1-config.h is unchanged
config.status: executing depfiles commands
config.status: executing libtool commands
make[1]: Entering directory '/home/pi/magnet/src/secp256k1'
make[1]: Leaving directory '/home/pi/magnet/src/secp256k1'
cd /home/pi/magnet; /bin/sh share/genbuild.sh /home/pi/magnet/build/build.h
/usr/lib/arm-linux-gnueabihf/qt5/bin/moc -DENABLE_WALLET -DBOOST_THREAD_USE_LIB -DBOOST_SPIRIT_THREADSAFE -DQT_DISABLE_DEPRECATED_BEFORE=0 -DBOOST_VARIANT_USE_RELAXED_GET_BY_DEFAULT -DUSE_DBUS -DUSE_IPV6=1 -DHAVE_BUILD_INFO -DLINUX -DQT_NO_DEBUG -DQT_PRINTSUPPORT_LIB -DQT_WIDGETS_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_DBUS_LIB -DQT_CORE_LIB -I/usr/lib/arm-linux-gnueabihf/qt5/mkspecs/linux-g++ -I/home/pi/magnet -I/home/pi/magnet/src -I/home/pi/magnet/src/json -I/home/pi/magnet/src/qt -I/home/pi/magnet/src/qt/plugins/mrichtexteditor -I/home/pi/magnet/src/leveldb/include -I/home/pi/magnet/src/leveldb/helpers -I/home/pi/magnet/src/secp256k1/include -I/usr/include/arm-linux-gnueabihf/qt5 -I/usr/include/arm-linux-gnueabihf/qt5/QtPrintSupport -I/usr/include/arm-linux-gnueabihf/qt5/QtWidgets -I/usr/include/arm-linux-gnueabihf/qt5/QtGui -I/usr/include/arm-linux-gnueabihf/qt5/QtNetwork -I/usr/include/arm-linux-gnueabihf/qt5/QtDBus -I/usr/include/arm-linux-gnueabihf/qt5/QtCore -I/usr/include/c++/6 -I/usr/include/x86_64-linux-gnu/c++/6 -I/usr/include/c++/6/backward -I/usr/lib/gcc/x86_64-linux-gnu/6/include -I/usr/local/include -I/usr/lib/gcc/x86_64-linux-gnu/6/include-fixed -I/usr/include/x86_64-linux-gnu -I/usr/include src/qt/overviewpage.cpp -o build/overviewpage.moc
usr/include/c++/6/bits/memoryfwd.:50: Parse error at "std"
Makefile:2050: recipe for target 'build/overviewpage.moc' failed
make: *** [build/overviewpage.moc] Error 1
    pi@raspberrypi:~/magnet $ 
 [/code]

Thank you for any help.

http://ift.tt/2zT57tv

Comments

Post a Comment

Popular posts from this blog

Antminer D3 Blissz Modified Firmware For Improved Performance

Image
Antminer D3 Blissz Modified Firmware For Improved Performance It is not a secret that the default firmware and even settings for many of the ASIC miners that come out from the manufacturers are hardly with the best/optimal settings and often they are also limited in what you can tweak yourself. So some more advanced users take the matter in their hands in order to further optimize for performance and or stability and reliability and even add extra features that help owners of the devices to get better profit or higher profit for example. One such case is the Antminer D3 Blissz Modified Firmware for the X11 ASICs being produces by Bitmain that you might want to give a try if you have even at least one of these ASIC miners. The custom firmware promises up to 20% lower power usage and some extra features such as ASIC voltage settings per chain as well as the ability to overclock or underclock per chain as well as more control on fan operational speeds. There are some usability improveme...
Read more

ETH To The Moon / Bank of England Cryptocurrency? / BTC Dominance / More (The Crypt0 Minute)

Image
ETH To The Moon / Bank of England Cryptocurrency? / BTC Dominance / More (The Crypt0 Minute) ►Please LIKE This Post On Steemit: http://ift.tt/2qkh4Yb Piano Instrumental By Omar Bham (Crypt0) 👍 Thank You Very Much For Watching This Video! Don't forget to smash those LIKE & SUBSCRIBE buttons :D 🎩►Become a Crypt0's News Patron: http://ift.tt/2vDXHXD ⛄►Check Out Our New Crypt0's News Amazon Storefront For Recommendations: http://ift.tt/2Br4nPB 🙇HELPFUL LINKS ►ICOs Raise One Billion Dollars In A Month: http://ift.tt/2A91Qow ►Huobi Is Now Headed To Japan: http://ift.tt/2Cbqk27 ►Verge Transaction IP Addresses: http://xvg.keff.org/ ►ScienceGuy's ETH Price Target: http://ift.tt/2CuwgGW ►Long Blockchain Corp: http://ift.tt/2BTmAFw ►Why 2018 Will Be The Year Of The Blockchain: http://ift.tt/2A2Krha ►Ethereum's Scalability Subsidy Program: http://ift.tt/2qgDNnS 🌌►Grab A Crypt0 T-Shirt: http://ift.tt/2khihd5 🚩🚩🚩A MUST HAVE ►Ledger Nano S (Top Multi-Asset Hardware Wal...
Read more